One-step vs four-step buttonhole

The XR9550 and the CS7000X sit at almost the same list price on Brother's own site — $269.99 against $279.99 — and they are not the same machine. The XR9550 spends its budget on the stitch library and the electronics; the CS7000X spends it on presser feet. Which is right for you comes down to one question: are you making clothes, or are you quilting?

For clothes, the XR9550 wins on buttonholes. Brother lists eight one-step auto-size buttonhole styles, against seven on the CS7000X and one on the XM2701. Buttonhole style matters more than it sounds — a keyhole buttonhole for a jacket, a rounded one for a blouse, a bar-tacked one for heavy cotton. It also carries an upper thread sensor, which stops you sewing eighteen inches of nothing before you notice the spool ran out, and a needle position key, which lets you shift the needle to sew an accurate narrow seam without owning a quarter-inch foot.

For quilting, the CS7000X wins, and it wins on one part: the walking foot. The XR9550 includes a spring-action quilting foot, which is a free-motion foot — it hops, and you move the fabric yourself. A walking foot is a different thing entirely: it feeds the top layer at the same rate as the feed dogs move the bottom layer, which is what stops a quilt sandwich shifting. The XR9550 does not include one.

The eight feet it does include cover garment work properly — an overcasting foot for finishing raw edges, a blind hem foot for invisible hems, a monogramming foot. Brother also puts a wide table and a hard case in the box, and at 10.14 lb it is the lightest machine on this site.

We have not sewn on this machine. The specifications are Brother's, and the price on the button is live from Amazon rather than remembered.

The kit it pairs with: Add a walking foot if you intend to quilt; the spring-action quilting foot in the box is for free-motion work, not for feeding batting evenly.

The GX37 is the machine that answers a narrow question very well: what is the cheapest Brother that still threads its own needle? Brother's specification lists the needle threading system as automatic and the buttonhole as an automatic one-step, on a machine it lists at $149.99. At the XM1010's $139.99 the threading system is manual, and that ten-dollar gap buys the feature we would protect first.

The rest of the specification is a competent mechanical machine and nothing surprising: 37 utility and decorative stitches selected on a dial, a jam-resistant quick-set drop-in top bobbin, a free arm for cuffs and sleeves, and an LED-lit work area. Brother lists six presser feet — zigzag, buttonhole, zipper, button sewing, blind stitch and narrow hemmer — which covers ordinary garment sewing and stops there.

Two things make it unusually well suited to a young or first-time sewer specifically. It weighs 10.14 lb, which is the lightest figure Brother publishes across the machines we cover, so it can be lifted onto a table and put away by someone small. And Brother includes a dust cover, which sounds trivial until you notice that the XM2701, the LX3817 and the SINGER M1500 all ship without one and a machine stored uncovered collects the lint that later causes tension problems.

What it does not have is a speed limiter. Brother publishes adjustable sewing speed control on the CS7000X and does not list it here, so on this machine the foot pedal is the only thing standing between a nervous beginner and full speed. That is manageable with a bit of practice on scrap and it is the one specification we would trade up for if the budget allowed.

We have not sewn on this machine. Every figure above is from Brother's own product page, read on 3 September 2026, and the price on the button is live from Amazon rather than remembered.

The kit it pairs with: Universal needles in 80/12 and 90/14, and more bobbins. The dust cover is already in the box, which is one line off the usual starter list.

The LX3817 is where the budget line genuinely bites, and it is worth being specific about how. Brother's specification page lists the needle threading system as manual. On the XM2701, fifty dollars higher, it is automatic. That one line is, in our view, the difference between a machine a beginner keeps using and one that gets put away — threading a needle by eye under a machine arm, at the end of a long day, is where a lot of first attempts end.

The buttonhole is the second cut. This machine sews a four-step auto-size buttonhole, which means moving the dial through four positions in the right order for each buttonhole. The XM2701 and the CS7000X sew a one-step buttonhole: place the button, press, done. If you are shortening trousers and taking in seams you will never notice. If you are making a shirt you will notice on the first placket.

What survives the cost-cutting is more interesting than what does not. It keeps the jam-resistant quick-set drop-in top bobbin — Brother has not fitted a front-loading case to save money — and it has an independent bobbin winding motor, so winding does not drive the needle. It has a free arm and an LED-lit work area. At 10.36 lb it is lighter than the XM2701.

The honest use case: this is a mending and hemming machine. If what you actually want is to take up jeans, fix a seam, and run a curtain hem twice a year, seventeen stitches and four feet is not a compromise, it is the correct amount of machine. If you think you might make a garment, the next machine up buys back the two features you will miss.

We have not sewn on this machine. Every specification above is from Brother's own product page, and the price on the button is live.

The kit it pairs with: Add a needle threader tool, a blind stitch foot and an overcasting foot if you intend to sew garments rather than mend them.